|
Application / Products >>
Extrusion >>
Dosing & Blending
Dosing & Blending
Colortronic's Disc dosing and blending provides dosing accuracy that is very repeatable and consistent even at very low dosing and feed rates.
Another option includes gravimetric batch dosing and blending systems where the components are dosed one after the other, weighed and homogeneously mixed in the separate mixing chamber.
Colortronic's Compact Discharge Unit, CDU ensures the immediate flow of material from material hoppers in continuous and batching processes.
The Colortronic Colorblend M is a synchronized, digital dosing system designed to precisely dose plastic additives, either in pellet or powder form, on any plastics processing machine, whether injection molding, blow molding, or all extrusion applications.
The Colortronic Colorblend M is a synchronized, digital dosing system designed to precisely dose plastic additives, either in pellet or powder form, on any plastics processing machine, whether injection molding, blow molding, or all extrusion applications.
The CSG Series Blenders offer stainless steel construction for all metering, weighing and blending components. The mixer section is designed for efficiency and blend homogeneity and adjustable slide gate stroke limiters provide for accurate metering of minor ingredients.
The Colortronic CT 22 Twin Screw Feeder with Agitation is ideal for gravimetric dosing of easy free-flowing to non free-flowing ingredients, including powders, fibers, flakes, and pellets.
Colortronic's CT 36 Twin Screw Feeder with Agitation is ideal for gravimetric dosing of easy, free-flowing to non-free-flowing ingredients, such as powders, fibers, flakes, and pellets.
The Synchroblend dosing system employs the volumetric dosing principle. In this system each component is proportioned in precisely uniform units and added synchronously with the other components.
Colortronic's gravimetric batch blender Ultrablend UB 95 is ideally suited for blending granulates, additives and regrinds.
Colortronic's gravimetric batch blender Ultrablend 375 is ideally suited for blending granulates, regrinds and non-compacting powders (less than 5%).
Colortronic's gravimetric batch blender Ultrablend 675 is ideally suited for blending granulates, reginds and non-compacting poweders (less than 5%)
Colortronic's gravimetric batch blender Ultrablend 975 is ideally suited for blending granulates, regrinds and non-compacting powders (less than 5%).
Graviblend M/L is a continuous loss-in-weight gravimetric dosing and blending system for free flowing plastic pellets.
Graviblend Plus is a continuous loss-in-weight gravimetric dosing and blending system for free flowing plastic pellets.
The CS 65 Single Screw Feeder with Agitation is ideal for dosing of free-flowing materials including powders, fibers, flakes, and pellets.
The CS75 Single Screw Feeder with Agitation is ideal for dosing of free-flowing materials including powders, fibers, flakes, and pellets.
Colortronic's FPC Blending System provides the ultimate on-line processing flexibility for precision gravimetric natural fiber-polymer composite formulation applications.
Colortronic<'s single screw feeder is ideally suited for dosing pellets, granulates, free flowing regrinds and flakes in continuous and batching processes.
The CGA Series Gravimetric Batch Blending System features precision auger metering of all ingredients. This weigh scale blending system is well suited for blending of almost all pellet and regrind materials. The CGA Series should be used if more than one regrind is required, or when difficult and hard-to-meter materials will be used.
The A3 Blender Control and Data Acquisition System is a data collection network program that can be used to download and analyze inventory run rates, run status, and target vs. actual recipe set points. Using A3, you can upload recipes and access recipe storage book functions, as well as start and stop blenders and feeders.
The CGC Series is designed for continuous extrusion applications. The CGC Series offers the most homogenous blend available versus common batch type blenders or mixers. Only the material weigh hoppers are mounted on precision load cells, eliminating the weight and vibration of the metering auger and motor assemblies.
CIT Series batch weigh inventory and density monitor units are designed to mount on an existing bin. The CIT Series accurately monitors material usage by weight with 1/10% span accurate cantilever load cells.
CF Series volumetric additive feeders have become the industry standard of accuracy and dependability for precision metering of color concentrate, regrind and other additives. Proven mechanical features include modular design for one or two materials, low-profile throat section, and an easy-to-clean, interchangeable stainless steel auger assembly.
C-Flex M is designed to offer the greatest flexibility
in flexible walled feeder design and construction.
The GH extrusion control and GH-M extruder rate monitor units match the extruder throughput, track material usage, and can control extruder output with the optional control system.
The GH-F Series gravimetric feeder adds colorant or other free-flowing material to your process, based on a self-calibrating controller that makes recalibration unnecessary and eliminates the overfeeding that typically accompanies volumetric feeders.
Colortronic's volumetric single screw feeder CS120 is ideally suited for dosing powders, pellets, granulates, regrinds,
fibers, and flakes in continuous and batching processes. The compact modular design gives the operator the flexibility to
meet changing process requirements.
Colortronic's volumetric single screw feeder CT65 is ideally suited for dosing powders, pellets, granulates, regrinds,
fibers, and flakes in continuous and batching processes. The compact modular design gives the operator the flexibility to
meet changing process requirements.
|
CDU Compact Discharge Unit
